Machine Specifications
GENERAL SPECIFICATIONS
More Photos Available Upon Request.
Manufacturer: Uni-Hydro
Model: 2551 / 1/4 x 51
Type: Hydraulic Power Squaring Shear
Rated Capacity: 1/4" x 51" Mild Steel
Maximum Cutting Length: 51"
Strokes Per Minute: 16 SPM
Blade Dimensions: 3/4" x 4" x 51"
Blade Cutting Edges: 4
Blade Rake: 1-1/4" Over 51"
Motor: 7.5 HP
Hydraulic Oil Capacity: 10 Gallons
Deck Height: 32"
Overall Dimensions: 80" W x 26" D x 72" H
Weight: Approximately 4,480 Lbs.
EQUIPPED WITH
36" Manual Back Gauge
24" Squaring Arm
Independent Hydraulic Hold-Downs
Center-Mounted Hydraulic Cylinder
Mechanical Pivot-Arm Linkage System
Three-Point Pressure Distribution
Fixed Low-Rake Blade Design
Electric Controls
Foot Switch Control
Four-Edge Shear Blades
Forklift Handling Provision / Overhead Lifting Eyelets
As-Is As Taken From Service
FEATURES
The Uni-Hydro Model 2551 utilizes a center-mounted hydraulic cylinder and patented mechanical linkage system that transfers cutting force through three pressure points across the blade. This design provides even energy distribution to minimize blade flex and increases cutting power throughout the stroke.
The fixed low-rake blade design allows the machine to shear both thinner and heavier material without requiring blade-gap adjustment when changing material thickness.
Compact in footprint yet rated for 1/4" mild steel across the full 51" cutting length, the Model 2551 is designed for general fabrication, maintenance and production
Disclaimer
Preliminary specifications are provided for general guidance only and may change without notice.
They are believed to be accurate but are not guaranteed. All specifications, dimensions, capacities,
weights, and performance figures should be independently verified by the buyer prior to purchase or use.
Bridgeline Machinery Corp. makes no representations or warranties, express or implied, regarding the completeness,
accuracy, or suitability of any machine specifications, and shall not be liable for any errors or omissions.
